Step4 Camera Installation
7. Attach Ceiling Mount Cover to the camera
Align the (o) mark on the cover with the (|) mark on the back of the camera, and then rotate the
cover clockwise to the (|) mark.
Make sure that the Ceiling Mount Cover is attached securely.
Note
If the cables cannot be fit in the roof space, because the ceiling is concrete for example,
or they cannot be in the Ceiling Mount Cover, cut the notch of the Ceiling Mount
Tip
Cover with a plier to provide a notch to pass the cables through. In this case, attach
the Ceiling Mount Cover first, then connect the cables.
8. After the installation, reboot the camera to initialize the camera position (→
dOperation Guide P.1-44).
2-18
2
1
Installation is now complete.