Repair Procedures - Scotsman C2648 - SERVICE MANUAL 11-2010 Service Manual

C2648 Service Manual

Repair Procedures

Purge valve
1 Push and hold the Off button to shut the
machine off.
2 Disconnect electrical power.
3 Remove front panel.
4 Unplug wires from valve coil.
Note: The coil can be removed from the valve body by rotating it 1/8 turn CW. After removal of the coil
the spring and plunger can be taken out.
5 Loosen screws holding valve bracket to mounting
bracket (circled area in photo).
6 Remove inlet and outlet hoses
7 Lift the valve and bracket up and off the keyhole
slots. Remove valve from cabinet.
8 Remove valve from bracket.
9 Reverse to reassemble
10 Push and release the On button to restart the
machine
Water level sensor
1 Push and hold the Off button until the machine shuts
off.
2 Remove the front panel.
3 Locate water level sensor.
4 Squeeze the locking tabs together and pull the sensor up and out of the sump.
5 Unplug the electrical connection from the sensor.
6 Reverse to reassemble.
November 2010
Page 44
Electrical Shock Hazard.
Disconnect electrical power
before beginning.