C2648 Service Manual
Repair Procedures
Inlet Water Solenoid Valve
1
Disconnect electrical power
2
Shut off the water supply.
3
Remove front panel.
4
Unplug wire from coil.
5
Disconnect water supply tube from the inlet of
the valve.
6
Disconnect the water outlet tube.
7
Remove the two mounting screws holding the valve to the center panel.
8
Pull the valve forward and out of the machine.
9
Reverse to reassemble.
.
November 2010
Page 38
Electrical Shock Hazard.
Disconnect electrical power
before beginning.