Options And Other Information - Scotsman C2648 - SERVICE MANUAL 11-2010 Service Manual

C2648 Service Manual - Installation

Options and Other Information

Smart-Board
When this option is present there is an additional
display panel in the area below the main control
board. It is not visible when the front panel is on.
The Smart-Board's features include:
•
Seven day programmable ice level setting
when used with the optional Vari-Smart ice
level control
•
Recording of machine operation, including
cycle time.
•
Calculation of average cycle time
•
Recall of malfunctions with the time they
occurred.
™
SmartBoard Advanced Feature Control
See Instructions for Available Features
34
ESC
SEL
ENTER
02-4293-01 Rev A.
November 2010
Page 19
Ice
The cuber drops ice in large sections. That ice will
break up into random parts as it falls into the bin,
but some large sections may remain on top of the
ice in the bin. When removing ice, tap the groups of
ice with an ice scoop to separate them into smaller
units.
Heat
Most heat is exhausted at the remote condenser.
The ice machine head should not generate
significant heat.
Noise
The ice machine will make noise when it is in ice
making mode. The compressor and water pumps
all produce some sound. It is also normal to hear
some cracking just before the harvest cycle begins.
In addition, during the harvest cycle each harvest
assist solenoid will click twice as it pushes the ice
out and returns to its normal position. The ice
harvests as a unit or slab, which makes some
noise when it impacts the bin. These noises are all
normal for this machine.
Caution: Do not place anything on top of the ice
machine, including the ice scoop. Debris and
moisture from objects on top of the machine can
work their way into the cabinet and cause serious
damage. Damage caused by foreign material is not
covered by warranty.