Repair Procedures - Scotsman C2648 - SERVICE MANUAL 11-2010 Service Manual

C2648 Service Manual

Repair Procedures

Contactor
1 Disconnect electrical power.
Electrical Shock Hazard.
Disconnect electrical power
before beginning.
2 Remove front panel.
3 Open control box cover.
4 Remove right side of control box.
5 Remove metal barrier from control box
6 Remove mounting screws holding contactor to control box.
7 Exchange wires from old controller to new. Refer to wiring diagram as needed.
Reverse to reassemble.
November 2010
Page 41