C2648 Service Manual
Harvest Assist Solenoid
1
Remove front panel.
2
Push and release Manual Harvest button
3
Disconnect electrical supply
Electrical Shock Hazard.
Disconnect electrical power
before beginning.
4
Unplug wires from solenoid
5
Remove screws holding solenoid coil to upper bracket. Note: Upper bracket stays in unit.
6
Remove bottom two screws holding bracket and solenoid to cabinet (see circled area). Remove coil
from unit.
7
Remove and replace plunger
Reverse to reassemble.
Harvest Assist Solenoid
November 2010
Page 39