Setting Up A Home And Office Network; Connecting To A Network Adapter - Dell Vostro 200 Owner's Manual

Slim tower
Hide thumbs Also See for Vostro 200:
Table of Contents

Advertisement

NOTE:
Access to the Dell™ Knowledge Base document may not be available in
certain countries.
Transferring Information using Windows Vista
The Windows Vista operating system provides the Easy Transfer wizard to
move data from a source computer to a new computer. You can transfer data,
such as:
User account
Files and folders
Program settings
Internet settings and favorites
E-mail settings, contacts, and messages
You can transfer the data to the new computer over a network or serial
connection, or you can store it on removable media, such as a writable CD,
for transfer to the new computer.
There are two ways to access the Easy Transfer wizard:
When Windows Vista setup is completed, you will see the Windows Vista
Welcome Center. One icon in the Welcome Center is Transfer Files and
Settings. Click this icon to start Windows easy Transfer.
If the Welcome Center dialog box has been closed, you can access Easy
Transfer by clicking Start
Tools→ Easy Transfer.

Setting Up a Home and Office Network

Connecting to a Network Adapter

NOTICE:
Plug the network cable into the network adapter connector on the
computer. Do not plug the network cable into the modem connector on the
computer. Do not plug a network cable into a telephone wall jack.
1 Connect the network cable to the network adapter connector on the back
of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure
that it is secure.
2 Connect the other end of the network cable to a network device.
→ All Programs→ Accessories→ System
Setting Up and Using Your Computer
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents