Memory Settings Screen - Dell PowerVault NX3000 Hardware Owner's Manual

Option
F1/F2 Prompt on Error
(Enabled default)

Memory Settings Screen

Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
(Enabled default)
Memory Operating Mode
Node Interleaving
(Disabled default)
Description
Enables the system to halt on errors during POST,
which allows the user to observe events that may scroll
by unnoticed during normal POST. The user can press
<F1> to continue or <F2> to enter the System Setup
program.
CAUTION:
the system will not halt if an error occurs during
POST. Any critical errors will be displayed and
logged in the system event log.
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the system memory speed.
Displays the amount of video memory.
Specifies whether system memory tests are run at system
boot. Options are Enabled and Disabled.
This field displays the type of memory operation if a
valid memory configuration is installed. When set to
Optimizer Mode, the memory controllers run
independently of each other for improved memory
performance. When set to Mirror Mode, memory
mirroring is enabled. When set to Advanced ECC
Mode, two controllers are joined in 128-bit mode
running multi-bit advanced ECC. For information about
the memory modes, see "System Memory."
If this field is Enabled, memory interleaving is supported
if a symmetric memory configuration is installed. If
Disabled, the system supports Non-Uniform Memory
architecture (NUMA) (asymmetric) memory
configurations.
Using the System Setup Program and UEFI Boot Manager
When setting this option to Disabled,
59