Memory Settings Screen; Processor Settings Screen - Dell PowerVault NX300 Hardware Owner's Manual

Memory Settings Screen

Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
(Enabled default)
Memory Operating Mode
Node Interleaving
(Disabled default)

Processor Settings Screen

Option
64-bit
Clock Speed
Bus Speed
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the system memory speed.
Displays the amount of video memory.
Specifies whether system memory tests are run at system
boot. Options are Enabled and Disabled.
This field displays the type of memory operation if a
valid memory configuration is installed. When set to
Optimizer Mode, the memory controllers run
independently of each other for improved memory
performance. When set to Mirror Mode, memory
mirroring is enabled. When set to Advanced ECC
Mode, two controllers are joined in 128-bit mode
running multi-bit advanced ECC. For information
about the memory modes, see "System Memory" on
page 115.
NOTE:
The Spare Mode option may not be present on all
systems.
If this field is Enabled, memory interleaving is supported
if a symmetric memory configuration is installed. If
Disabled, the system supports Non-Uniform Memory
architecture (NUMA) (asymmetric) memory
configurations.
Description
Specifies if the processor(s) support 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
Using the System Setup Program and UEFI Boot Manager
61