Dell PowerVault NX3000 Hardware Owner's Manual page 88

Figure 3-8. Removing or Installing the Internal SD Module
8
1 latch
3 SD flash card
5 release tab
7 internal SD module connector
4 Connect the internal SD module cable to the connector on the control
panel board. See Figure 3-8.
5 Close the system. See "Closing the System."
6 Reconnect the system and peripherals to their power sources, and turn
them on.
88
Installing System Components
2
1
7
3
4
2 internal SD module
4 SD card slot (SD connector)
6 internal SD module cable
8 control panel board
5
6