Memory Settings Screen; Processor Settings Screen - Dell PowerVault NX3100 Hardware Owner's Manual

Memory Settings Screen

Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
(Enabled default)
Memory Operating Mode
Node Interleaving
(Disabled default)

Processor Settings Screen

Option
64-bit
Core Speed
Bus Speed
Description
Displays the system memory size.
Displays the system memory type.
Displays the system memory speed.
Displays the video memory size.
Specifies whether system memory tests are run at system
boot. Options are Enabled and Disabled.
This field displays the type of memory operation if a
valid memory configuration is installed. When set to
Optimizer Mode, the memory controllers run
independently of each other for improved memory
performance. When set to Mirror Mode, memory
mirroring is enabled. When set to Advanced ECC
Mode, two controllers are joined in 128-bit mode
running multi-bit advanced ECC. For information about
the memory modes, see "System Memory" on page 82.
NOTE:
The Spare Mode option may not be present
on all systems.
If this field is Enabled, memory interleaving is supported
if a symmetric memory configuration is installed. If
Disabled, the system supports Non-Uniform Memory
architecture (NUMA) (asymmetric) memory
configurations.
NOTE:
The Node Interleaving field must be set to Disabled
when using Mirror mode.
Description
Specifies if the processor(s) support 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
Using the System Setup Program and UEFI Boot Manager
45