Removing A Cd Or Dvd (Without Power) - HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

Drives

Removing a CD or DVD (Without Power)

Ä
CAUTION: To prevent damage to the pen tip, do not insert the pen tip
into the release access.
If the tablet PC is turned off or if no power is available, the media
release button on the drive will not work. To remove a disc from
an optical drive without using the media release button:
1. Insert a small object like the end of a paper clip into the
release access 1 in the front bezel of the drive.
2. Press gently on the paper clip until the media tray is released,
then pull the tray outward until it is fully extended
3. Remove the disc from the tray 3. If the media tray is not fully
extended, tilt the disc as you remove it. Handle the disc by the
edges, not the flat surfaces.
4. Close the media tray 4.
5. Place the disc in a protective case.
Removing a CD or DVD from an optical drive when power is not
available
4–6
.
2
Hardware Guide