Using An Sd Card - HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

Additional Hardware Options
3. To release the PC Card, press the PC Card eject button 1.
4. Gently pull out the PC Card 2.
Removing a PC Card

Using an SD Card

An SD Card is smaller than a PC Card, but can add similar
functions to the tablet PC system. Most commonly, an SD Card is
used to add backup, storage, wireless network, fax/modem, or
cellular telephone functions.
When using an SD Card, HP recommends that you connect the
system to external power whenever possible. Some SD Cards use
large amounts of power and can quickly drain a battery pack.
Ä
CAUTION: To prevent loss of work or damage to an SD Card:
■
Do not save your work to an SD Card unless the tablet PC is
connected to external power or you are certain that the battery
pack has enough charge remaining to complete the operation.
■
Do not shut down the tablet PC or remove the SD Card until all
activities supported by the card are complete.
9–4 Hardware Guide