HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual page 49

Pen, Command Controls and Keyboards
If the system remains unresponsive after selecting Shut Down in
the Windows Security window, slide and hold the power switch
for 4 seconds. For additional shut down procedures, refer on this
CD to the Software Guide, "Power" chapter. For information
about using the ctrl+alt+delete command in non-Windows
applications, refer to the application documentation.
Reset Command
When the Setup utility is open, the Windows Security button
simulates the reset button found on some computers. When the
tablet PC is reset, the tablet PC restarts and all unsaved
information is lost.
The reset function can be used to restore functionality when the
system has become unresponsive. For information about the
Setup utility, which is a non-Windows utility, refer on this CD to
the Software Guide, "Setup and Support Utilities" chapter.
Esc Button
Press the esc button manually to open the Setup utility or to use
the esc button like the
Setup Utility Function
While the tablet PC is starting up, the HP logo is displayed and
the cursor flashes in the upper right hand corner of the screen.
During this time, press the esc button to open the Setup utility.
For information about the Setup utility, refer on this CD to the
Software Guide, "Setup and Support Utilities" chapter.
Esc Key Function
When the tablet PC is on, press the esc button to enter the esc
command as you would by pressing the
keyboard. The esc button can be used with or without the
on-screen keyboard or an external keyboard.
2–12
key on a standard keyboard.
esc
key on a standard
esc
Hardware Guide