Removing A Cd Or Dvd (With Power) - HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

Removing a CD or DVD (with Power)

If power is available:
1. Be sure the tablet PC is on.
✎
2. Remove the disc from the tray 3 by gently pushing down
on the spindle while pulling up on the outer edges of the disc.
If the media tray is not fully extended, tilt the disc as you
remove it. Handle the disc by the edges, not the flat surfaces.
3. Close the media tray 4.
4. Place the disc in a protective case.
Removing a CD or DVD from an optical drive when power
is available
Hardware Guide
Press the media release button 1 on the drive bezel to release the
media tray, then pull the tray outward until it is fully extended 2.
Drives
4–5