Accessing Communication Software; Finding At Command Information - HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

Internal Modem
6. In the Phone and Modem Options window, select the
7. Select your modem > Properties button > Modem tab.
8. Clear the Wait For Dial Tone Before Dialing check box.
9. Select the OK button > OK button.

Accessing Communication Software

To access preinstalled modem software, including software
for terminal emulation and data transfer, select Start > All
Programs > Accessories > Communications, then select an
application, wizard, or utility.

Finding AT Command Information

It is not necessary to use AT commands with most modem
software. If you prefer to use AT commands, refer on this CD to:
■
Modem Command Guidelines for information about
accessing Hyperterminal, identifying the modem in your
tablet PC, and using AT commands.
■
The Soft Modem AT Command Reference Manual for the
AT commands supported by your modem. This guide is
provided in English only.
6–8
Modems tab.
Hardware Guide