Responding To A Network Service Boot Prompt; Finding Wireless Lan Information - HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

Responding to a Network Service Boot
Prompt
After the internal NIC has been enabled for startup, the Network
Service Boot prompt is displayed very briefly in the lower right
corner of the screen each time the tablet PC is started or restarted.
To connect to a network by responding to the prompt, use either
of the following procedures:
■
Press the tab button on the tablet PC.
■
Press
tablet PC keyboard, press

Finding Wireless LAN Information

The tablet PC supports wireless LAN provided through a
mini PCI board, a PC Card, or an SD Card. A wireless LAN
PC Card or an SD Card is optional. A wireless mini PCI board
may be preinstalled.
■
Information about using a preinstalled wireless LAN board is
provided on the Documentation Library Wireless LAN CD
included with your tablet PC.
■
Information about the Bluetooth wireless option is provided
on the Documentation Library Bluetooth CD included with
your tablet PC.
■
Information about Microsoft's Wireless LAN configuration
utility is available in the Help & Support Center, which is
accessible from the Start Menu.
If you purchase a wireless device as an option, documentation
about the device is included with the option.
Hardware Guide
on an optional keyboard. To press F12 on the
F12
Fn+F11/F12.
Network Connections
7–5