Monitoring The Charge In A Battery Pack; Obtaining Accurate Charge Information; Displaying Charge Information On The Screen - HP TC1000 - Tablet PC - Crusoe TM5800 1 GHz Hardware Manual

Battery Packs
Monitoring the Charge in a
Battery Pack

Obtaining Accurate Charge Information

To increase the accuracy of all battery charge displays:
■
Allow a battery pack to discharge to less than 10 percent of
a full charge through normal use before charging it.
■
When you charge a battery pack, charge it fully.
■
If a battery pack has not been used for one month or more,
calibrate the battery pack instead of simply charging it.
For calibration instructions, see
later in this chapter.
Displaying Charge Information on the
Screen
Accessing Charge Displays
To display battery charge information on the screen, use the
operating system Power Meter feature.
To access Power Meter displays, use either of the following
methods:
■
Select Start > Control Panel > Performance and Maintenance
icon > Power Options icon > Power Meter tab.
■
Select the Power Meter icon in the system tray.
To display the Power Meter icon in the system tray:
1. Select Start > Control Panel > Performance and Maintenance
icon > Power Options icon > Advanced tab.
2. Select the Always Show Icon On The Taskbar check box.
3. Select the OK button.
4. If the icon is not displayed, select in the system tray the icon
for Show Hidden Icons.
3–10
"Calibrating a Battery Pack"
Hardware Guide