Portdisable; Portenable; Porterrshow - Dell PowerVault 50F Installation And Troubleshooting Manual

---------------------------------------------------------------
4-24 Installation and Troubleshooting Guide
The optional parameter
If the current password is incorrect, the command exits without saving any changes.
If the number of retries attempts is exceeded, the command either steps to the next
user or exits, saving any changes made thus far.
The portDisable command disables a specific port. Devices attached to a disabled
port cannot communicate with the fabric. The command syntax is
<port #>.
The portEnable command enables a specific port. The command syntax is
able <port #>.
Figure 4-13 shows an example of the portErrShow command screen, which displays
an error summary for all ports. One output line is displayed per port, and shows error
counters in ones, thousands (the number is followed by 'k'), or millions (the number is
followed by 'm'). The fields are described in Table 4-14. The figure shows an eight-port
switch where port six has a high number of errors and should be examined.
% 
frames tx
frames rx
is a double-quoted, valid user name.
  
Frames transmitted
Frames received

portDisable

portEn-