Dell PowerVault 50F Installation And Troubleshooting Manual page 49

Dell powervault 56f 16-port fibre channel switch installation and troubleshooting guide
Hide thumbs Also See for PowerVault 50F:
Table of Contents

Advertisement

support.dell.com
Pressing <Enter> while Flash Date is selected displays the date and time of the last
flash firmware update. If you upgrade the firmware in flash memory with a different
firmware version, the date the new firmware was entered is displayed.
Use this date to quickly establish the date the firmware was updated.
Pressing <Enter> while Boot Prom Update is selected displays the date and time
the boot prom was manufactured. Use this date to establish the boot prom version.
Pressing <Enter> while Up Time is selected displays the time the switch has been
up since the last reboot of the switch.
Pressing <Enter> while Powered Time is selected displays the time the switch has
been powered on.
Pressing <Enter> while Port Type is selected displays the status of each port on the
switch. The ports start with the first port on the switch which is the port in the top left
position when the ports are viewed from the switch's front panel. An example status
might be:
The definitions assigned in the example above are:
E — E_Port is an interswitch expansion port used to connect to an E_Port of
another switch to build a larger switch fabric.
F — F_Port, the fabric access port, is used to connect an N-Port and is used
within the switch fabric for control and management.
L — FL_Port is a switch port connected to an arbitrated loop.
G — G_Port is a generic port that can operate either as an E_Port or an F_POrt
but has not yet assumed a specific function in the fabric.
U — U_Port is a generic port that can operate as an E_Port, F_Port, or FL_Port but
has not yet assumed a specific function in the fabric.
N — N_Port is used within the switch itself for internal switch control traffic. It
does not have an external physical port.
x — Indicates no interface nodule is installed.
Pressing <Enter> while Module Type is selected displays the type of GBIC module
installed in a port. The module options are:
L — long wave length
S — short wave length
Managing the PowerVault 56F 16-Port Fibre Channel Switch
3-15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault 51fPowervault 56f

Table of Contents