Technical Specifications; Table 2. Specifications - Intel SASMF8I - RAID Controller Hardware User's Manual

Jumper
J7
J9

Technical Specifications

The design and implementation of the Intel
electromagnetic emissions, susceptibility to radio frequency energy, and the effects of
electrostatic discharge. See the appendices for regulatory marks and certifications.
Table 2
Specification
Operating Voltage
Card Size
Array Interface
to Host
SAS Bus Speed
SAS Controller
SAS / SATA Ports
Firmware
Compatible Devices
Cabling
Redundant
Configuration
Enclosure
Management
12
Table 1. Jumper Descriptions
Description
Internal SAS/SATA
port connector,
ports 0-3
2
Keyed I C
connector
lists the specifications for the Intel
+3.3 V, +12 V
Low-profile MD2 PCI Express* adapter card size (6.600 inches by 2.713
inches)
PCI Express* Rev 1.0A, x4 lane width 2.5 Gbps
3 GBps per port, point-to-point
One LSI SAS 1068 controller
2x4 internal ports. Supports 8 SAS/SATA devices using expanders, and
40 virtual disks.
2 MB in reflashable flash ROM
•
Mixed capacity, mixed SATA II and SAS in different enclosures
•
Non-disk devices, including expanders.
•
Small, thin cables that do not restrict airflow
•
Shared connectors for multiple drive types.
Config on disk (COD) stores RAID configuration.
2
I C out-of-band, SES2 in-band, SAF-TE (LEDs)
Type
SFF8087 Connection to SAS/SATA devices.
3-pin Out-of-band enclosure management (SES2)
connector
®
RAID Controller SASMF8I minimizes
®
RAID Controller SASMF8I.

Table 2. Specifications

®
Intel RAID Controller SASMF8I
Intel® RAID Controller SASMF8I Hardware User's Guide
Comments