Intel SASMF8I - RAID Controller Hardware User's Manual page 18

10. Watch the boot process until you see a BIOS message to inform you of the key
combination to press to enter the Intel
Configuration Utility. A message similar to the following appears:
Press <CTRL> + <E> to run the Intel
II Configuration Utility.
This message times out after several seconds. If you miss it, you will pass the option
to get into the Intel
The firmware takes several seconds to initialize and then displays the Intel
Controller SASMF8I number and firmware version. The numbering of the controllers
follows the PCI slot scanning order used by the server board.
8
®
®
Embedded Server RAID Technology II Configuration Utility.
Intel® RAID Controller SASMF8I Hardware User's Guide
Embedded Server RAID Technology II
®
Embedded Server RAID Technology
®
RAID