Related Manuals for Cypress Suprex SPX-7410
Summarization of Contents
Suprex SPX-7400 Series Operations Manual
Overview
General introduction to the SPX-7400 series fiber optic units and their purpose.
Features
Highlights key capabilities and functionalities of the SPX-7400 series units.
Fiber Optic Specifications
Details regarding fiber optic connections, modes, and loss budgets.
Electrical and Mechanical Specifications
Presents physical dimensions, operating conditions, and electrical characteristics.
External Connections and DIP Switch Settings
Central Unit Settings
Configuration options for the SPX-7400 Central unit, including DIP switch usage.
Remote Unit Settings
Configuration options for the SPX-7400 Remote unit, including DIP switch usage.
Quick Reference For Typical Connections
SPX-7400 Series Central Connection Diagram
Visual guide for connecting the SPX-7400 Central unit to an access control panel.
SPX-7400 Series Remote Connection Diagram
Visual guide for connecting the SPX-7400 Remote unit to a card reader and door strike.
Setup and Pre-installation
Bench Testing Procedure
Step-by-step instructions for testing the SPX-7400 units before field installation.
Status Indicators
LED Diagnostic Indicator Explanation
Details on the meaning of different LED states for troubleshooting unit status.
Door Strike and LED I/O
Wiring Example: Door Strike Follows LED
Diagram showing how to wire the door strike to follow the LED signal.
Wiring Example: Door Strike Does Not Follow LED
Diagram illustrating door strike wiring independent of the LED signal.
Door Strike and LED I/O Details
Accessory I/O Operation Explanation
Explains how accessory control I/O ports function with active low inputs and open collector outputs.
Relay Controls
Relay 1 Control Wiring
Diagram showing input and output connections for Relay 1 control.
Relay 2 Control Wiring
Diagram showing input and output connections for Relay 2 control.
Relay Controls (Continued)
Relay 3 Control Wiring and Function
Diagram and explanation for Relay 3, functioning as an alarm monitor.
Relay 4 Control Wiring
Diagram showing input and output connections for Relay 4 control.
Application Note: Supervised Contacts
Theory of Operation for Supervised Contacts
Explains how the system monitors contact status using resistance comparison.
Supervised Contact Wiring Examples
Illustrates wiring configurations for monitoring normally closed and normally open contacts.
Setup Using Expansion Modules
Expansion Module Setup Process
Steps to configure the SPX-7400 to utilize EXP-2000 expansion modules.
Operation with Expansion Modules
Details on how the system operates when expansion modules are integrated.
Central Unit Configuration Modes
Table showing DIP switch settings for different expansion module configurations.
LYNK Fiber Optic Solution
Door/Parking Gate System Diagram
Overview diagram of the LYNK solution for door and parking gate applications.
Wiegand Expansion Module: Central Interface
Panel Central Interface Wiring Diagram
Diagram showing connections for the Wiegand Expansion Module's central interface.
Wiegand Expansion Module: Remote Interface
Reader/Door Remote Interface Wiring Diagram
Diagram showing connections for the Wiegand Expansion Module's remote interface.
Need help?
Do you have a question about the Suprex SPX-7410 and is the answer not in the manual?
Questions and answers