Table of Contents
Advertisement
Command Mode
Privileged Exec
Example
Console#show policy-map interface ethernet 1/5
Service-policy rd_policy input
Console#
Multicast Filtering Commands
This switch uses IGMP (Internet Group Management Protocol) to query for any
attached hosts that want to receive a specific multicast service. It identifies the ports
containing hosts requesting a service and sends data out to those ports only. It then
propagates the service request up to any neighboring multicast switch/router to
ensure that it will continue to receive the multicast service.
Command Groups
IGMP Snooping
IGMP Query
Static Multicast Routing
IGMP Filtering and
Throttling
Multicast VLAN Registration Configures a single network-wide multicast VLAN shared by hosts
IGMP Snooping Commands
Command
ip igmp snooping
ip igmp snooping vlan static Adds an interface as a member of a multicast group
ip igmp snooping version
ip igmp snooping
leave-proxy
ip igmp snooping
immediate-leave
show ip igmp snooping
show mac-address-table
multicast
Table 4-67
Multicast Filtering Commands
Function
Configures multicast groups via IGMP snooping or static assignment,
sets the IGMP version, displays current snooping and query settings,
and displays the multicast service and group members
Configures IGMP query parameters for multicast filtering at Layer 2
Configures static multicast router ports
Configures IGMP filtering and throttling
residing in other standard or private VLAN groups, preserving
security and data isolation for normal traffic
Table 4-68
IGMP Snooping Commands
Function
Enables IGMP snooping
Configures the IGMP version for snooping
Enables IGMP leave proxy on the switch
Enables IGMP immediate leave for a VLAN interface
Shows the IGMP snooping and query configuration
Shows the IGMP snooping MAC multicast list
4
Example
Page
4-201
4-206
4-209
4-211
4-212
Mode
Page
GC
4-202
GC
4-202
GC
4-203
GC
4-203
IC
4-204
PE
4-203
PE
4-205
4-201
Hide quick links:
Advertisement
Table of Contents
