Show Snmp Engine-Id; Table 4-38 Show Snmp Engine-Id - Display Description - TP-Link TL-SG5426 Installation Manual

4
Command Line Interface
fill the octet. For example, entering the value "123456789" results in an engine
ID of "1234567890."
• A local engine ID is automatically generated that is unique to the switch. This
is referred to as the default engine ID. If the local engine ID is deleted or
changed, all SNMP users will be cleared. You will need to reconfigure all
existing users (page 4-113).
Example
Console(config)#snmp-server engine-id local 12345abcdef
Console(config)#snmp-server engineID remote 54321fedcba
Console(config)#
Related Commands
snmp-server host (4-104)

show snmp engine-id

This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID
80000000030004e2b316c54321
Console#
Field
Local SNMP engineID
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the snmp EngineID
Remote SNMP engineID
IP address
4-108

Table 4-38 show snmp engine-id - display description

Description
String identifying the engine ID.
was last configured.
String identifying an engine ID on a remote device.
IP address of the device containing the corresponding remote SNMP engine.
IP address
192.168.1.19