Displaying Lacp Settings And Status For The Local Side; Table 3-8 Lacp Internal Configuration Information - TP-Link TL-SG5426 Installation Manual

3
Configuring the Switch

Displaying LACP Settings and Status for the Local Side

You can display configuration settings and the operational state for the local side of
an link aggregation.
Field
Oper Key
Admin Key
LACPDUs Interval
LACP System Priority
LACP Port Priority
Admin State,
Oper State
3-88

Table 3-8 LACP Internal Configuration Information

Description
Current operational value of the key for the aggregation port.
Current administrative value of the key for the aggregation port.
Number of seconds before invalidating received LACPDU information.
LACP system priority assigned to this port channel.
LACP port priority assigned to this interface within the channel group.
Administrative or operational values of the actor's state parameters:
• Expired – The actor's receive machine is in the expired state;
• Defaulted – The actor's receive machine is using defaulted operational partner
information, administratively configured for the partner.
• Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,
distribution is currently disabled and is not expected to be enabled in the absence
of administrative changes or changes in received protocol information.
• Collecting – Collection of incoming frames on this link is enabled; i.e., collection
is currently enabled and is not expected to be disabled in the absence of
administrative changes or changes in received protocol information.
• Synchronization – The System considers this link to be IN_SYNC; i.e., it has
been allocated to the correct Link Aggregation Group, the group has been
associated with a compatible Aggregator, and the identity of the Link Aggregation
Group is consistent with the System ID and operational Key information
transmitted.
• Aggregation – The system considers this link to be aggregatable; i.e., a potential
candidate for aggregation.
• Long timeout – Periodic transmission of LACPDUs uses a slow transmission rate.
• LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)