Editing Vlan Groups; Vlan Database; Table 4-55 Editing Vlan Groups - TP-Link TL-SG5426 Installation Manual

Syntax
show garp timer [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: Unit 1)
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-4)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer:
Leave timer:
Leaveall timer: 1000 centiseconds
Console#
Related Commands
garp timer (4-166)

Editing VLAN Groups

Command

vlan database

vlan
vlan database
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Command Mode
Global Configuration
100 centiseconds
60 centiseconds
Table 4-55 Editing VLAN Groups
Function
Enters VLAN database mode to add, change, and delete
VLANs
Configures a VLAN, including VID, name and state
4
VLAN Commands
Mode Page
GC 4-167
VC 4-168
4-167