Table of Contents
Advertisement
Chapter 1: Introduction
This switch provides a broad range of features for Layer 2 switching. It includes a
management agent that allows you to configure the features listed in this manual.
The default configuration can be used for most of the features provided by this
switch. However, there are many options that you should configure to maximize the
switch's performance for your particular network environment.
Key Features
Feature
Configuration Backup and
Restore
Authentication
Access Control Lists
DHCP Client
DHCP Snooping
Port Configuration
Rate Limiting
Port Mirroring
Port Trunking
Broadcast Storm Control
Static Address
IEEE 802.1D Bridge
Store-and-Forward Switching Supported to ensure wire-speed switching while eliminating bad frames
Spanning Tree Algorithm
Virtual LANs
Traffic Prioritization
Qualify of Service
Multicast Filtering
Table 1-1 Key Features
Description
Backup to TFTP server
Console, Telnet, web – User name / password, RADIUS, TACACS+
Web – HTTPS
Telnet – SSH
SNMP v1/2c - Community strings
SNMP version 3 – MD5 or SHA password
Port – IEEE 802.1X, MAC address filtering
Supports up to 128 ACLs, 96 MAC rules and 96 rules per system
Supported
Supported with Option 82 relay information
Speed, duplex mode and flow control
Input rate and output limiting per port
One or more port mirrored to a single analysis port
Supports up to 32 trunks using either static or dynamic trunking (LACP)
Supported
Up to 8K MAC addresses in the forwarding table
Supports dynamic data switching and addresses learning
Supports standard STP, and Rapid Spanning Tree Protocol (RSTP) and
Multiple Spanning Trees(MSTP)
Up to 256 using IEEE 802.1Q, port-based, protocol-based or private VLANs
Default port priority, traffic class map, queue scheduling, or Differentiated
Services Code Point (DSCP), and TCP/UDP Port
Supports Differentiated Services (DiffServ)
Supports IGMP snooping and query, as well as Multicast VLAN Registration
1-1
Hide quick links:
Advertisement
Table of Contents
