Hardware Installation; Installation Requirements; Mounting Bracket - TP-Link EAP110 Installation Manual

Hardware Installation

The EAP can be wall-mounted or ceiling-mounted. Please suitably arrange your
wire layout before mounting the EAP. We take EAP110 as example to explain the
installation. EAP110 can be powered via the provided PoE adapter, while EAP120
and EAP220 can be powered via a PoE switch or the provided power adapter.

1. Installation Requirements

Before installation, check the package contents for the following items:
EAP
Wing Nuts (3)
Other installation equipments may require, including a pencil, ruler, drill, drill bit,
screwdriver and a ladder.

2. Mounting Bracket

The following figure describes the layout of the mounting bracket.
ARROW 2 is used to align
with ARROW 1 under the
interface panel
Ceiling mounting slot
Wall mounting slot
Locking clip
05
Mounting Bracket
Plastic Wall
Washers (3)
Anchors (3)
Installation Guide
Pan-head
Self-tapping
Screws (3)
Screws (3)