Power On - TP-Link TL-SG1008 User Manual

TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048
Figure 2-1 Rivet the "L" brackets onto the Switch
Figure 2-2 Fasten the Switch in the rack
2.3

Power On

The Gigabit Ethernet Switch is powered by AC power supply. Powering on the
Switch, it will automatically initialize and its LED indicators should respond as
follows:
1) All of the 10/100Mbps Link/Act and 1000Mbps Link/Act LED indicators of
the TL-SG1008 will flash momentarily at first, flash sequence later and
flash momentarily lastly, which represent a resetting of the system.
All of the 10/100Mbps Link/Act and 1000Mbps Link/Act LED indicators of the
Gigabit Ethernet Switch User Guide
5