Chapter 2 Installation; Mounting The Switch On A Desk; Mounting The Switch In A Rack - TP-Link TL-SG1008 User Manual

TL-SG1008/TL-SG1016/TL-SG1024/TL-SG1048
Chapter 2
2.1

Mounting the Switch on a Desk

Before placing the Switch on a desk, attach four rubber footpads to the flutes
on the Switch bottom, then lay the Switch on the desktop, where can be able
to withstand 5kg of weight.
TL-SG1008, TL-SG1016, TL-SG1024 and TL-SG1048 are different in the
number of LED indicators and RJ45 ports. All figures are of TL-SG1008 in this
user's guide.
Note
Make sure there is a grounded AC outlet within 1.5 meters, and working
well.
Make sure there is free space for radiating heat and air.
Make sure not too place anything to heavy on top of the switch.
2.2

Mounting the Switch in a Rack

The dimension of the Gigabit Ethernet Switch is designed according to the
standard 19" rack-mountable steel case of Electronic Industries Association.
Turn off all the equipment connected to the Switch before mounting it in the
rack, then rivet the two "L" brackets onto each side of the Switch, fasten it with
screws in the rack.
Installation
4
Gigabit Ethernet Switch User Guide