Manual Upgrade; Restore Interrupted Upgrade After Power Failure - TP-Link Archer AX50 User Manual

Chapter 13
4. Wait a few minutes for the upgrade and reboot to complete.
Tips:
If there's a new and important firmware update for your router, you will see the notification (similar as shown below) on
your computer as long as a web browser is opened. Click
username and password you set for the router. You will see the

13. 4. 2. Manual Upgrade

1. Download the latest firmware file for the router from www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to Advanced >
4. Focus on the Device Information
matched with the
5. Focus on the Local Upgrade
firmware file, and click Upgrade.
6. Wait a few minutes for the upgrade and reboot to complete.

13. 4. 3. Restore Interrupted Upgrade After Power Failure

If your router cannot start up after an upgrade interruption due to power failure, follow
the steps below to restore the interrupted upgrade. Otherwise, your router cannot work
again.
1. Make sure you have the latest firmware file in your computer. If not, try another way
to connect your computer to the Internet and download the latest firmware file from
www.tp-link.com.
2. Connect your computer to the router with an Ethernet cable.
3. Visit 192.168.0.1 and you will see the following upgrade page.
System Tools > Firmware
section. Make sure the downloaded firmware file is
Hardware Version.
section. Click
Upgrade now, and log into the web management page with the
Firmware Upgrade page.
Upgrade.
Browse to locate the downloaded new
Manage the Router
81