Specifications are subject to change without notice. is a registered Package Contents....................1 trademark of TP-LINK Technologies Co., Ltd. Other brands and product Chapter 1: Introduction of the Product..............1 names are trademarks or registered trademarks of their respective holders. 1.1 Overview of the Product................1 No part of the specifications may be reproduced in any form or by any means 1.2 Features....................2...
Note: If any of the above contents is damaged or missing, please contact configuration is required. Auto MDI/MDI-X cable detection on all ports the retailer from whom you purchased the TL-SG1008/TL-SG1016/TL-SG1024 eliminate the need for crossover cable or Uplink port. Each port can be used 8/16/24-port Gigabit Ethernet Switch for assistance.
Make sure not to place anything to heavy on top of the switch. Mounting the Switch in a Rack Figure 2-2 Fasten the Switch in the rack The dimension of TL-SG1008/TL-SG1016/TL-SG1024 is designed according to the standard 19” rack-mountable steel case of Electronic Industries Power On Association.
This Chapter describes the front panel, rear panel and LED indicators of the Figure 3-3 TL-SG1024 Switch LEDs sketch Switch. TL-SG1008, TL-SG1016 and TL-SG1024 just differ in the number of Power LED: This indicator will light solid red when the Switch powers ×...