Power Saving Mode
For power saving, you may encounter the three situations below:
1.
The LED icon
after 60 seconds.
2.
The WiFi connection will turn off automatically if no WiFi devices connect
to the M5250 for 15 minutes.
3.
When the M5250 is in manual connection mode, the 3G connection will
disconnect automatically if internet activity idles for 5 minutes.
How do I recover from power saving mode?
In 1 and 2, you can simply tap the power button to recover.
•
In 3, you can log into the web-management page, and go to "
•
->Dial-up",then click the Connect button to reconnect.
*Please refer to the User Guide to modify the 3G and Wi-Fi Power Saving
default settings.
Screen Display
Important Safety Information
Keep the device away from water, fire, humidity or hot environments.
•
Do not attempt to disassemble or modify the device.
•
Do not use damaged power adapter or USB cables to charge the device.
•
Do not use any chargers other than those recommended.
•
Do not use the device where wireless devices are not allowed.
•
*Please follow the above instructions when operating the device. We cannot
guarantee that no accidents or damage will take place due to improper use
of the device. Please use with care and operate at your own risk.
and
will turn off and the
5
will flash automatically
Battery Status
Internet Connected
WiFi Status
Advanced