Preparation - Sewing
16
Thread Cutter
Changing the Needle
On the left of the head frame
pull both threads from front to back over the cutter
█
the threads release automatically as soon as the first stitch is sewn
█
Removing the needle
raise needle
█
power switch to «0» (off)
█
lower the presser foot
█
loosen the needle clamp screw
█
pull the needle down to remove
█
Inserting the needle
flat side of needle to the back
█
insert the needle as far as it will go
█
tighten the needle clamp screw
█
033301.70.04_1007_B330_B350_B380_EN