Environmental Protection - Bernina 350PE User Manual

Safety Instructions
2
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic safety precautions
should always be followed, including the following:
Read all instructions before using this sewing computer.
When the sewing computer is not in use, it should be
disconnected from the electricity supply by removing the
plug from the outlet.
DANGER!
To reduce the risk of electrical shock:
1. The sewing computer should never be left unattended when
plugged in.
2. Always unplug the sewing computer from the electrical outlet
immediately after using and before cleaning.
3. LED radiation. Do not view directly with optical instruments.
LED class 1M
WARNING!
To reduce the risk of burns, fire, electric shock or injury to
persons:
1. Use the sewing computer only for purposes as described in
this manual. Use only attachments/accessory recommended by
the manufacturer as contained in this manual.
2. Do not allow the sewing computer to be used as a toy. Close
attention is necessary when this sewing computer is used by
or near children and infirm persons. This sewing computer is
not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction concerning use of the sewing
computer by a person responsible for their safety. Children
must be kept under supervision to ensure that they do not
play with the sewing computer.
3. Never operate this sewing computer if:
it has a damaged cord or plug
█
it is not working properly
█
it has been dropped or damaged
█
it has fallen into water
█
Take the sewing computer to the nearest authorized BERNI-
NA dealer for examination, repair, electrical or mechanical
adjustment.
4. Never operate the sewing computer with any air vents
blocked. Keep ventilation openings of the sewing computer
free from lint, dust and/or fabric bits.
5. Keep fingers away from all moving parts. Special care is
required in the needle area of the sewing computer.
6. Never drop or insert any objects into any opening on the
sewing computer.
7. Do not use the sewing computer outdoors.
8. Do not operate the sewing computer where aerosol products
(spray) or oxygen is being administered.
9. Do not pull or push the fabric while stitching. This may deflect
the needle, causing it to break.
10. Do not use bent needles.
11. Always use the BERNINA original stitch plate. The wrong
stitch plate can cause needle breakage.
12. To disconnect, turn power switch to «0» (off), then remove
the plug from the outlet. Do not unplug by pulling the cord,
instead grasp the plug to pull it from the outlet.
13. Turn power switch to «0» (off) when making any adjustments
in the needle area, such as changing the needle or the
presser foot, etc.
14. Always unplug the sewing computer from the electrical outlet
when carrying out cleaning or maintenance work or any other
user servicing adjustments mentioned in this manual.
15. This sewing computer is provided with double insulation
(except USA and Canada). Use only genuine replacement
parts. Please note the advice on the servicing of double-insu-
lated products.
SERVICING DOUBLE
INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are
provided instead of grounding. No grounding means is provided
on a double-insulated product nor should a means for grounded
be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system and should
only be done by qualified service personnel. Replacement parts
for a double-insulated product must be identical to the original
parts in the product.
A double insulated product is marked with the words: «Double-
Insulation» or «double-insulated».
The symbol
DISCLAIMER
No liability will be assumed for any possible damage which
arises from misuse of this sewing computer.
This sewing computer is intended for household use only.
SAVE THESE
INSTRUCTIONS!
033301.70.04_1007_B330_B350_B380_EN
may also be marked on the product.

Environmental Protection

BERNINA is committed to the protection of the
environment. We strive to minimize the environmental
impact of our products by continuously improving
product design and our technology of manufacturing.
At end of life please dispose this product in an
environmentally responsible way according to the
national directive. Do not throw away this product with
your household waste. In case of doubt, please
contact your dealer.
If the sewing computer is stored in a cold room, it
should be brought to a warm room about one hour
before use.