Bernina 350PE User Manual page 28

Functions
28
Programming Alphabets and Numbers
4 5
Starting to sew
press the foot control = the sewing computer starts automatically at the
█
beginning of a stitch pattern combination
select Pattern End as well = the sewing computer stops automatically at the
█
end of a stitch pattern combination
The following special programs cannot be saved in memory:
330:
No. 5
No. 10
No. 11
No. 16
350:
No. 5
No. 10-11 Buttonholes
No. 12
No. 13
No. 20
No. 21
380:
No. 5
No. 10-13 Buttonholes
No. 14
No. 15
No. 22
No. 23
6
Opening the memory
press the button
█
the cursor and the available number of empty memory spaces (e.g. 30)
█
start to blink, and «mem» appears
press the Alphabet button
█
the letter A in the alphabet of your choice appears on the display
█
use the arrow buttons
█
select letter/number
█
press the button
█
the number of available memory spaces appears
█
proceed as described to select and program more letters and/or numbers
█
when programming more than one word, select the underscore symbol (_)
█
to program a space between the words
If the stitch length and/or width of letters or numbers have been
altered, the alterations will affect all of them.
If you only want to alter single letters or numbers, this must be done
individually.
033301.70.04_1007_B330_B350_B380_EN
Securing program
Buttonhole
Button sewing-on program
Darning program
Securing program
Button sewing-on program
Eyelet
Darning program
Basting stitch
Securing program
Button sewing-on program
Eyelet
Darning program
Basting stitch
2
5 to select the alphabet of your choice
4 and 6 to scroll the alphabet
3 = letter/number is programmed