Bobbin Case - Bernina 350PE User Manual

Bobbin Case

To remove the bobbin case
raise needle
█
power switch to «0» (off)
█
open the bobbin cover
█
grasp the latch of the bobbin case
█
remove bobbin case
█
To insert the bobbin case
hold the bobbin case latch
█
the finger on the case should point upwards
█
insert the case so that it clicks into place
█
Bobbin thread cutter
insert the bobbin case
█
take the thread over cutter
█
close the bobbin cover
A
█
033301.70.04_1007_B330_B350_B380_EN
The bobbin thread does not have to be brought up as the loose end
is just the right length to start sewing.
A and cut it
Preparation - Sewing
13