Sewing stitches - Buttonholes
42
Buttonhole in Long-Term Memory
1
2
Button Sewing-On Program
Saving programmed buttonholes in long-term memory
after programming press the button
█
the buttonhole is now saved in long term memory
█
3
Recalling saved buttonhole
Programmed saved buttonholes can be opened for re-use even after the
sewing computer has been disconnected.
select the desired buttonhole type
█
press the button
█
sew the programmed buttonhole
█
only one length per buttonhole can be saved. Saving a new length with the
█
button 3 will overwrite the previously saved buttonhole length
Darning foot No. 9 */**/***
Button sew-on foot No. 18 */**/***
Sews buttons with 2 or 4 holes.
Sewing on buttons
buttons sewn on for decorative purposes only are stitched without a thread
█
shank
the length of the shank (= thread between button and fabric) can be made
█
shorter or longer as required with foot no. 18
Sewing on buttons with Darning foot no. 9
select Button sew-on program
█
check distances between holes with the handwheel and adjust stitch width
█
if necessary
sew the securing stitches; hold the threads when starting to sew
█
sew program
█
sewing computer stops automatically when program is completed and is
█
ready for the next button
Beginning and ending threads
the threads are secured and can be trimmed
█
For secure results
pull both bobbin thread ends until the ends of the upper thread are visible
█
on the wrong side (knot if required)
trim thread ends
█
Sewing on buttons with foot no. 18
set the shank length with the screw on the foot
█
select Button sewing-on program and continue as with foot no. 9
█
Beginning and ending threads
the threads are secured and can be trimmed
█
For secure results
pull both bobbin thread ends until the ends of the upper thread are visible
█
on the wrong side (knot if required)
trim thread ends
█
Sewing 4-hole button
█
█
█
033301.70.04_1007_B330_B350_B380_EN
3
2
sew the front holes
carefully move the button forward
sew the back holes with the same program