Expansion Boards; Half-Length Expansion Board; Full-Length Expansion Board - HP AX691B Maintenance And Service Manual

Power up the recovery server. A 1759 POST message is displayed, stating that valid data was
5.
flushed from the cache. This data is now stored on the drives in the recovery server. You can now
transfer the drives (and controller, if one was used) to another server.

Expansion boards

Half-length expansion board

To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
Disconnect any external cables that are connected to the expansion board.
4.
Remove the PCI riser cage
5.
Disconnect any internal cables that are connected to the expansion board.
6.
Remove the expansion board.
7.
To replace the component, reverse the removal procedure.

Full-length expansion board

To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
Disconnect any external cables that are connected to the expansion board.
4.
Remove the PCI riser cage
5.
Disconnect any internal cables that are connected to the expansion board.
6.
("Access panel" on page 30).
("PCI riser cage" on page 41).
("Access panel" on page 30).
("PCI riser cage" on page 41).
Removal and replacement procedures 50