Systems Insight
Display LED and color
Fan (amber)
Power supply (amber)
Power supply (amber)
Power cap (off)
Power cap (green)
Power cap (flashing
amber)
Power cap (green)
IMPORTANT:
required. Test each bank of DIMMs by removing all other DIMMs. Isolate the failed DIMM by
replacing each DIMM in a bank with a known working DIMM.
Rear panel components
Item
Description
1
PCI slot 5
2
PCI slot 6
3
PCI slot 4
4
PCI slot 2
5
PCI slot 3
Health LED
System power
LED
Red
Green
Red
Amber
Amber
Green
—
Amber
—
Flashing green
—
Amber
—
Green
If more than one DIMM slot LED is illuminated, further troubleshooting is
Status
Two or more fans have failed or been
removed.
•
Only one power supply is installed and
that power supply is in standby.
•
Power supply fault
•
System board fault
•
Redundant power supply is installed
and only one power supply is
functional.
•
AC power cord is not plugged into
redundant power supply.
•
Redundant power supply fault
•
Power supply mismatch at POST or
power supply mismatch through hot-
plug addition.
Standby
Waiting for power
Power cap has been exceeded
Power is available
Component identification 78