Hot-Plug Power Supply - HP AX691B Maintenance And Service Manual

CAUTION:
unless all bays are populated with either a component or a blank.
Access the product rear panel (on page 27).
1.
Remove the power supply blank.
2.
WARNING:
or power supply blank to cool before touching it.
To replace the component, reverse the removal procedure.

Hot-plug power supply

WARNING:
or power supply blank to cool before touching it.
CAUTION:
unless all bays are populated with either a component or a blank.
To remove the component:
Determine how many hot-plug power supplies are installed:
1.
If only one hot-plug power supply is installed, power down the server.
o
If more than one hot-plug power supply is installed, continue with the next step.
o
Disconnect the power cord from the source.
2.
Access the product rear panel (on page 27).
3.
Remove the power cord from the server.
4.
To prevent improper cooling and thermal damage, do not operate the server
To reduce the risk of personal injury from hot surfaces, allow the power supply
To reduce the risk of personal injury from hot surfaces, allow the power supply
To prevent improper cooling and thermal damage, do not operate the server
Removal and replacement procedures 32