To replace the component, reverse the removal steps. When re-installing the fans, press down on the top
of each fan to be sure it is seated properly.
Expansion slot covers
CAUTION:
and remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components,
minimize the amount of time the access panel is open.
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the expansion slot cover:
5.
To remove slot cover 1 or 4, push in on the retainer to release it, and then slide out the cover.
o
To prevent damage to the server or expansion boards, power down the server
For proper cooling do not operate the server without the access panel, baffles,
("Access
panel" on page 30).
("PCI riser
cage" on page 41).
Removal and replacement procedures 46