CAUTION:
Detaching the cable causes any unsaved data in the cache module to be lost.
Removing the cache module
To remove the component:
Power down the server (on page 25).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Remove the air baffle
5.
Remove the cache module.
6.
To replace the component, reverse the removal procedure.
CAUTION:
module is fully inserted before pressing down.
Removing the battery pack
To remove the component:
Power down the server (on page 25).
1.
Extend or remove the server from the rack
2.
the server from the
Remove the access panel
3.
Remove the PCI riser cage
4.
Do not detach the cable that connects the battery pack to the cache module.
rack" on page 26).
("Access
panel" on page 30).
("PCI riser
cage" on page 41).
("Air
baffle" on page 42).
To prevent damage to the cache module during installation, be sure the cache
rack" on page 26).
("Access
panel" on page 30).
("PCI riser
cage" on page 41).
("Remove the server from the
("Remove the server from the
Removal and replacement procedures 48
rack" on page 27,
"Extend
rack" on page 27,
"Extend