Configuring Before Scanning - Xerox DocuMate 250 User Manual

Scanning

Configuring Before Scanning

60
Choosing Configure Before Scan simply opens a scanning
interface when you press or click a scan button. You can then use
the interface to change the Resolution, Scan Mode, and other
settings. When you scan, the scanned image will still be sent as
the file type and to the same Destination Application already
selected in the One Touch Properties window for that button.
To configure before scanning:
1. Open the One Touch Properties window.
2. Select the scan configuration Configure Before Scan.
Select Configure
Before Scan.
Right-click on Configure
Before Scan to get the
menu, and choose the
interface to use for
configuring.
3. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
TWAIN—The TWAIN interface opens for you to make changes
prior to scanning. See "Scanning with the TWAIN Interface
from PaperPort" on page 81.
ISIS—The ISIS Scan interface opens for you to make changes
prior to scanning. See "Scanning with the ISIS Interface" on
page 100.
WIA—The Windows Image Acquisition Interface (WIA) opens
for you to make changes prior to scanning. The WIA option is
only available if your computer is running Microsoft Windows
XP. See "Scanning with the WIA Interface" on page 95.
4. Click OK or Apply on the One Touch Properties window.
DocuMate 250 Scanner User's Guide