Setting The Paper Thickness - Fujitsu fi-5950 Operator's Manual

2.9 Setting the Paper Thickness

When multifeeds or paper jam occurs frequently, adjust the paper thickness by using the Paper
Thickness button on the operator's panel. (Under normal circumstances, use the default setting.)
Set the paper thickness on the Operator Panel.
When pressing the
When pressing the
The following five (5) steps of document thickness are selectable.
Thin Thick
:
:
:
:
:
HINT
button, the scanner is set for one level thicker document.
button, the scanner is set for one level thinner document.
Thin
Medium thin
Medium (Documents with thickness of 52 through 127g/m
Medium thick
Thick
• When multifeeds occur frequently, set the thickness level thicker.
• When picking failure or paper jams frequently occur, set the thickness level
thinner.
• Multifeeds, picking failures and paper jams can also occur due to worn-out
of the consumables and dirt of the rollers. When such problems are not
cleared, change the consumables or clean inside of the scanner.
Function
Hopper Height
Paper Thicknes s
Thin Thick
Send to Scan
Prevent picking failure and paper jam
Prevent multifeeding

2.9 Setting the Paper Thickness

2
) <Default setting>
29
2