How To Check And Reset The Consumable/Cleaning Counter - Fujitsu fi-5950 Operator's Manual

5.2 How to check and reset the
Consumable/Cleaning Counter
This section describes the procedure of the following items using Software Operation Panel in PC.
Confirmation of consumable usage and cleaning cycle.
•
Counter reset after replacing the consumable or cleaning the scanner.
•
ATTENTION
■ Checking consumable or cleaning counter
1. Turn on the scanner and confirm if it is connected correctly to you PC.
2. From the [Start] menu select [All Programs]
Microsoft Windows]
⇒ The [Software Operation Panel] window will be displayed.

5.2 How to check and reset the Consumable/Cleaning Counter

If the [Software Operation Panel] is password protected, enter the pass-
word to cancel the View Only mode.
For details on how to enter the password to cancel the View Only mode,
refer to "Password Setting" on page
[Software Operation Panel] .
175.
[Scanner Utility for
5
121