Configuring The Scan Settings - Fujitsu fi-5950 Operator's Manual

2.13 Configuring the Scan Settings

■ TWAIN Driver
The TWAIN driver is a software driver that conforms to the TWAIN standard. This driver can be used with
an application that supports TWAIN to perform scanning.
Normally, the scanner driver is launched via an application, and then the scan settings are configured in the
setup dialog box of the driver (some applications may not display the setup dialog box).
HINT
Main screen
You can perform settings for the TWAIN Driver on this window.
The following describes the main setting items.
For details on each functions, refer to
•
[Help] or [F1] button).
Resolution
Specifies the resolution of scanning.
It can be specified by selecting a default value from the list or customizing (specifies any
resolution in 1 dpi unit, within a range of 50 to 600 dpi ).
By marking the [Predefine] checkbox, you can select one from three predefined settings as
[Normal], [Better], [Best] to scan documents instead of setting details by yourself.
Otherwise, you can change the details of the predefined settings on the [Resolution Setting]
window, which appears when you click on the [...] button.
Ways to launch the scanner driver differ depending on the application.
For more details, refer to the manual or the Help files of the application.
"TWAIN Driver Help" (appears by pressing

2.13 Configuring the Scan Settings

2
43