Fujitsu fi-5950 Operator's Manual page 205

Item
Retain current
The Paper thickness setting on the Operator
paper thickness panel is memorized and displayed after turn-
"Section 8.12" ing off and on the power.
Cleaning Cycle The cleaning cycle of the scanner is speci-
"Section 8.13"
fied by this setting. When Page counter
(Consumable counter) exceeds the value
specified here, the background color of the
counter becomes yellow, and the message to
ask user to clean the scanner may appear.
Life Counter When the Page counter (Consumable coun-
Alarm Setting ter) described in Section 5.2 exceeds the
"Section 8.14" value specified here, the counter background
color becomes yellow.
Set the interval If the document is skewed and a section of
for feeding sheets the scanned image will be cut off, Automatic
"Section 8.15" Page Size Detection automatically selects a
page size to ensure that all the image is
scanned successfully. As a result, scanning
time may take longer due to the page size
selected.
Thin Paper Mode To scan thin paper documents, enable this
"Section 8.16" mode.
Soft Pick Setting When a number of sheets are picked at a
"Section 8.17" time and multi-feed is detected frequently,
this setting may be effective.
Paper jam detec- Specify the degree of jam detection at the
tion feeder.
"Section 8.18"
AutoCrop Bound- Specify the AutoCrop Boundary processing
ary for when "Automatic Page Size Detection"
"Section 8.19" is selected.
SCSI Bus Width
Specify the data transfer width for SCSI
"Section 8.20" connection.
Auto color Detec- Specify the slice level for automatically
tion detecting Color/Monochrome
"Section 8.21"
Alarm setting For the beeper to sound the alarm of a paper
"Section 8.22" jam or multifeed, select Alarm at error.
Jam detection By selecting "Enable", such a case in which
outside of scan- the document is fed outside the scannable
nable area when area due to abnormal skew can be judged as
transporting a paper jam.
paper
"Section 8.23"
Imprinter selec- Select the Pre-imprinter option or the Post-
tion imprinter option if you have installed the
"Section 8.24"
options (to be purchased separately).
Explanation Selectable parameter
Remember/Do not remember
1,000 to 255,000 sheets,with
1,000 sheets increment
Show cleaning instructions:
Yes/No
For each consumable
10,000 to 2,550,000 with
10,000 increment
4 steps from Short (Default) to
Long
Disable/Thin paper mode/
Super-thin paper mode
Enable/Disable
Normal/Sensitivity-Low
Round Up/Round Down/Opti-
mize
16 bit (Wide)/8 bit
1 to 255 (steps)
Disable alarm/Enable alarm
Enable/Disable
Normal (obey Host specifica-
tion)/Forcibly select Pre-
imprinter/Forcibly select Post-
imprinter
8.1 Scanner Settings
Default
Do not
remember
10,000 sheets
No
8
600,000 sheets
Short
Disable
Disable
Sensitivity-
Low
Round Down
16 bit (Wide)
5
Disable alarm
Disable
Normal (obey
Host specifica-
tion)
185