Fujitsu fi-5950 Operator's Manual page 196

Setting the [View Only mode]
Set the Software Operation Panel to [View Only mode] in the following procedure.
1. Set a password.
⇒ For details, refer to
2. Right-click the Software Operation Panel icon in the taskbar, and select
[View Only mode] from the menu.
⇒ The Software Operation Panel enters the [View Only mode].
HINT
176
8.1 Scanner Settings
"Setting a Password" on page
In [View Only mode], a check mark appears next to [View Only mode] in the
menu that is displayed by right-clicking the Software Operation Panel icon.
175.